 |
 |
 |
 |
 |
 |
Scaffolding Products Scaffolding Accessories  |
 |
 |
|
Home - Scaffolding Products - Support Scaffold - Wall Forms & Floor Forms
 |
|
Scaffolding Products
Wall Forms & Floor Forms
 |
Floor Forms are widely used for casting of floor slabs and other construction applications which gives concrete finish.
We manufacture wall & floor forms in standard sizes but these are largely tailor-made according to the client's specifications & requirements. These are manufactured with emphasis on precision & squareness and give excellent concrete finish and cuts cost & time involved.
Wall Forms:
The standard wall form system of steel shuttering comprises of steel panels manufactured out of 2.5 mm (12 swg.) thick skin plate and 45 x 45 x 5 mm punched angles that are jig assembled to ensure complete inter-changeability. It offers maximum economy due to infinite reusability and is therefore universally used to cast RCC columns,beams, walls, culverts, docks and precast units.
Internal Corner Wall Forms are formed by means of standard 150 x 150 mm, 225 x 225 mm or 300 x 300 mm wide 90° internal corner wall forms, which are supplied in 1250, or 2500 mm lengths. Used in conjunction with standard 300 mm, 450 mm and 600 mm wide wall forms. Other width and length dimensions for can be tailor-made according to the requirements of the job.
Splayed Internal and External Corner Wall Forms are tailor-made to obtain angles other than 90°. Further, we also execute orders for odd dimensioned closures, step-up and filler Make-up Wall forms.
Floor Forms :
Floor Forms commonly known as Centering Plates, are manufactured out of 2mm (14 swg.) sheets with pressed flanges and stiffeners that maintain edges even after considerable number of uses. The corners are reinforced to further extend the life of the forms.
Standard Floor Forms are made in 600 mm widths and 1150 and 900 mm lengths. They can also be manufactured in thickness of 2.5 mm (12 swg.) and 10 mm (10 swg.) for use in bridges and industrial building constructions.
Adjuster Forms or Fillers fill up odd shapes and sizes created on the fringes. These are available in 1150 x 300 and 900 x 300 mm sizes.
Wall Forms:
The standard wall form system of steel shuttering comprises of steel panels manufactured out of 2.5 mm (12 swg.) thick skin plate and 45 x 45 x 5 mm punched angles that are jig assembled to ensure complete inter-changeability. It offers maximum economy due to infinite reusability and is therefore universally used to cast RCC columns,beams, walls, culverts, docks and precast units.
Internal Corner Wall Forms are formed by means of standard 150 x 150 mm, 225 x 225 mm or 300 x 300 mm wide 90° internal corner wall forms, which are supplied in 1250, or 2500 mm lengths. Used in conjunction with standard 300 mm, 450 mm and 600 mm wide wall forms. Other width and length dimensions for can be tailor-made according to the requirements of the job.
Splayed Internal and External Corner Wall Forms are tailor-made to obtain angles other than 90°. Further, we also execute orders for odd dimensioned closures, step-up and filler Make-up Wall forms.
Floor Forms :
Floor Forms commonly known as Centering Plates, are manufactured out of 2mm (14 swg.) sheets with pressed flanges and stiffeners that maintain edges even after considerable number of uses. The corners are reinforced to further extend the life of the forms.
Standard Floor Forms are made in 600 mm widths and 1150 and 900 mm lengths. They can also be manufactured in thickness of 2.5 mm (12 swg.) and 10 mm (10 swg.) for use in bridges and industrial building constructions.
Adjuster Forms or Fillers fill up odd shapes and sizes created on the fringes. These are available in 1150 x 300 and 900 x 300 mm sizes.
 |
|
|
|||||||||
|
|
|
© Devco India.. All Rights Reserved (Terms of Use)Developed and Managed by IndiaMART InterMESH Limited